Dell EMC OpenManage SNMP Reference Guide Version 9.1

PDF

Controller Table

This table describes available properties for each controller on the managed system.

The following object sets up the Controller Table.

Table 1. Controller Table. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1
Description	Defines the controller table, which is a table of managed Redundant Array of Independent disks (RAID) controllers. The number of entries is related to the number of RAID controllers discovered in the system.
Syntax	SEQUENCE OF ControllerEntry
Access	Not accessible

Table 2. Controller Entry. The following table describes the name, object ID, description, syntax, access level, and index.
Name	`controllerEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1
Description	Defines the controller table entry, which is an entry in the table of RAID controllers. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Syntax	ControllerEntry
Access	Not accessible
Index	`controllerNumber`

Table 3. Controller Number. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.1
Description	Identifies the instance number of the controller entry.
Syntax	Integer
Access	Read-only

Table 4. Controller Name. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.2
Description	Identifies the name of the controller in this subsystem as represented in Storage Management. Includes the controller type and instance. For example: PERC 3/QC 1.
Syntax	DisplayString
Access	Read-only

Table 5. Controller Vendor. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.3
Description	Identifies the controller's (re)seller's name.
Syntax	DisplayString
Access	Read-only

Table 6. Controller Type. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.4
Description	Identifies the type of this controller: 1: SCSI 2: PowerVault 660F 3: Power Vault 662F 4: Integrated/Intelligent Drive Electronics (IDE) 5: Serial Advanced Technology Architecture (SATA) 6: Serial Attached SCSI (SAS) 9: PCIe SSD
Syntax	Integer
Access	Read-only

Table 7. Controller State. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.5
Description	Identifies the status of the controller's subsystem (which includes any devices connected to it). Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
Syntax	Integer
Access	Read-only

Table 8. Controller Severity. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerSeverity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.6
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Table 9. Controller Rebuild Rate In Percent . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerRebuildRateInPercent`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.7
Description	Identifies the percent of the compute cycles dedicated to rebuilding failed array disks.
Syntax	Integer
Access	Read-only

Table 10. Controller Firmware Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerFWVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.8
Description	Identifies the controller's current firmware version.
Syntax	DisplayString
Access	Read-only

Table 11. Controller Cache Size in Megabytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerCacheSizeInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.9
Description	Identifies the controller's current amount of cache memory in megabytes. If this size is 0, it is less than a megabyte.
Syntax	Integer
Access	Read-only

Table 12. Controller Cache Size in Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerCacheSizeInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.10
Description	Identifies the controller's current amount of cache memory that is less than a megabyte. This combined with the controllerCacheSizeInMB is the total amount of memory.
Syntax	Integer
Access	Read-only

Table 13. Controller Physical Device Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPhysicalDeviceCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.11
Description	Identifies the number of physical devices on the controller channel including both disks and the controller.
Syntax	Integer
Access	Read-only

Table 14. Controller Logical Device Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerLogicalDeviceCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.12
Description	Identifies the number of virtual disks on the controller.
Syntax	Integer
Access	Read-only

Table 15. Controller Partner Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPartnerStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.13
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 16. Controller Host Port Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerHostPortCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.14
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 17. Controller Memory Size in Megabytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerMemorySizeInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.15
Description	Identifies the size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte. This attribute is only supported on Adaptec controllers.
Syntax	Integer
Access	Read-only

Table 18. Controller Memory Size in Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerMemorySizeInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.16
Description	Identifies the size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB is the total size of the memory. This attribute is only supported on Adaptec controllers.
Syntax	Integer
Access	Read-only

Table 19. Controller Drive Channel Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerDriveChannelCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.17
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 20. Controller Fault Tolerant . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerFaultTolerant`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.18
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 21. Controller C0 Port 0 World Wide Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0Port0WorldWideName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.19
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 22. Controller C0 Port 0 Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0Port0Name`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.20
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 23. Controller C0 Port 0 ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0Port0ID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.21
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 24. Controller C0 Target . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0Target`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.22
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 25. Controller C0 Channel . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0Channel`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.23
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 26. Controller C0 Operating System Controller . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0OSController`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.24
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 27. Controller C0 Battery State . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0BatteryState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.25
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 28. Controller C1 Port 0 World Wide Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1Port0WWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.26
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 29. Controller C1 Port 0 Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1Port0Name`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.27
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 30. Controller C1 Port 0 ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1Port0ID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.28
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 31. Controller C1 Target . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1Target`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.29
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 32. Controller C1 Channel . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1Channel`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.30
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 33. Controller C1 Operating System Controller . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1OSController`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.31
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 34. Controller Battery State C1 . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1BatteryState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.32
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 35. Controller Node World Wide Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerNodeWWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.33
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 36. Controller C0 Port 1 World Wide Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC0Port1WWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.34
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 37. Controller C1 Port 1 World Wide Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerC1Port1WWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.35
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 38. Controller Battery Charge Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerBatteryChargeCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.36
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 39. Controller Roll-Up Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.37
Description	Indicates severity of the controller state. This is the combined status of the controller and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 40. Controller Component Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.38
Description	Indicates the status of the controller itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 41. Controller Nexus ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.39
Description	Durable unique ID for this controller.
Syntax	DisplayString
Access	Read-only

Table 42. Controller Alarm State . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerAlarmState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.40
Description	Indicates state, or setting for the controller's alarm. Possible values: 1: Enabled 2: Disabled 3: Not Applicable
Syntax	Integer
Access	Read-only

Table 43. Controller Driver Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.41
Description	Indicates currently installed driver version of the controller
Syntax	DisplayString
Access	Read-only

Table 44. Controller PCI Slot . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPCISlot`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.42
Description	Indicates the PCI slot number or embedded number for controllers on the motherboard
Syntax	DisplayString
Access	Read-only

Table 45. Controller Cluster Mode . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerClusterMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.43
Description	Identifies if the controller is in cluster mode. Possible values: 1: Enabled 2: Disabled 3: Active (enabled and active) 99: Not Applicable
Syntax	Integer
Access	Read-only

Table 46. Controller Minimum Firmware Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerMinFWVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.44
Description	The minimum firmware version for Storage Management to support the controller.
Syntax	DisplayString
Access	Read-only

Table 47. Controller Minimum Driver Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerMinDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.45
Description	The minimum driver version for Storage Management to support the controller.
Syntax	DisplayString
Access	Read-only

Table 48. Controller SCSI Initiator ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerSCSIInitiatorID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.46
Description	The SCSI ID of the initiator.
Syntax	Integer
Access	Read-only

Table 49. Controller Channel Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerChannelCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.47
Description	The number of channels on the controller.
Syntax	Integer
Access	Read-only

Table 50. Controller Reconstruct Rate . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerReconstructRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.48
Description	The rate for reconstruct on the controller.
Syntax	Integer
Access	Read-only

Table 51. Controller Patrol Read Rate . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPatrolReadRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.49
Description	The rate for patrol read on the controller.
Syntax	Integer
Access	Read-only

Table 52. Controller BGI Rate . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerBGIRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.50
Description	The rate for background initialization on the controller.
Syntax	Integer
Access	Read-only

Table 53. Controller Check Consistency Rate . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerCheckConsistencyRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.51
Description	The rate for check consistency on the controller.
Syntax	Integer
Access	Read-only

Table 54. Controller Patrol Read Mode . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPatrolReadMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.52
Description	Identifies the patrol read mode. Possible values: 1: Automatic (enabled) 2: Manual (enabled) 3: Disabled
Syntax	Integer
Access	Read-only

Table 55. Controller Patrol Read State . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPatrolReadState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.53
Description	The state of the patrol read. Possible values: 1: Stopped - not running 2: Ready - ready to start 4: Active - is running 8: Aborted - has aborted
Syntax	Integer
Access	Read-only

Table 56. Controller Patrol Read Iterations . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPatrolReadIterations`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.54
Description	The number of times Patrol Read has been run on this controller.
Syntax	Integer
Access	Read-only

Table 57. Controller Storport Driver Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerStorportDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.55
Description	Provides current Windows OS storport driver version. Not applicable for Linux.
Syntax	Octet String
Access	Read-only

Table 58. Controller Minimum Required Storport Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerMinimumRequiredStorportVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.56
Description	Provides minimum required storport driver version for Windows OS only.
Syntax	Octet String
Access	Read-only

Table 59. Controller Encryption Capable . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerEncryptionCapable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.57
Description	Indicates encryption capability of the controller. Value: 1 - Capable, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 60. Controller Encryption Key Persent . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerEncryptionKeyPresent`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.58
Description	Indicates presence of encryption key for the controller. Value: 1 - Yes, 0 - No, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 61. Controller Persistent Hot Spare . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPersistentHotSpare`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.59
Description	Indicates Persistent Hot Spare capability of the controller. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax	Integer
Access	Read-only

Table 62. Controller Spin Down Unconfigured Drives . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerSpinDownUnconfiguredDrives`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.60
Description	Indicates controller capability to put unconfigured drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax	Integer
Access	Read-only

Table 63. Controller Spin Down Hot Spare Drives . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerSpinDownHotSpareDrives`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.61
Description	Indicates controller capability to put hot spare drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax	Integer
Access	Read-only

Table 64. Controller Spin Down Time Interval . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerSpinDownTimeInterval`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.62
Description	Shows the duration in minutes after which, the unconfigured or hot spare drives is spun down to power save mode. Value: 30 to 1440 NOTE: A value of 9999 indicates that the feature is not available.
Syntax	Integer
Access	Read-only

Table 65. Controller Encryption Mode . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerEncryptionMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.63
Description	Indicates the current encryption mode of the controller. Value: 0 - No Encryption, 1 - Local Key Management (LKM), 2 - Dell Key Management (DKM), 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 66. Controller CacheCade. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerCacheCade`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.64
Description	Indicates if the controller is CacheCade capable or not. Value: 1 - Capable, 0 - Not Capable, 99 - Undetermined
Syntax	Integer
Access	Read-only

Table 67. Controller Spin Down Configured Drives . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerSpinDownConfiguredDrives`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.65
Description	Indicates controller capability to spin down configured physical disks. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Syntax	Integer
Access	Read-only

Table 68. Controller Automatic Power Saving . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerAutomaticPowerSaving`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.66
Description	Indicates controller capability for automatic power saving. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Syntax	Integer
Access	Read-only

Table 69. Controller Configured Drives SpinUp Time . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerConfiguredDrivesSpinUpTime`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.67
Description	Indicates configured drives spin up start time. Value: 1:00 AM to 12:59 PM, 9999 - Undetermined
Syntax	DisplayString
Access	Read-only

Table 70. Controller Configured Drives SpinUp TimeInterval . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerConfiguredDrivesSpinUpTimeInterval`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.68
Description	Indicates configured drives spin up time interval in hours. This value is added with configured drives start time to arrive at time window in which configured drives are always spin up. Value: 1 .. 24, 9999 - Undetermined
Syntax	Integer
Access	Read-only

Table 71. Controller Preserved Cache . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPreservedCache`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.69
Description	Indicates if preserved cache is present on the controller. Values: 1- Yes 0 - No 99 - Not available / Not applicable
Syntax	Integer
Access	Read-only

Table 72. Controller PI Enable . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerPIEnable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.70
Description	Indicates if T10 PI is enabled on a controller. Values are: 0 : T10 PI disabled 1 : T10 PI enabled
Syntax	Integer
Access	Read-only

Table 73. Controller Current Mode . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerCurrentMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.71
Description	Indicates the current controller mode.
Syntax	DisplayString
Access	Read-only

Table 74. Front Chassis Slot . The following table describes the name, object ID, description, syntax, and access level.
Name	`frontChassisSlot`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.72
Description	Shows the physical slot on the chassis for stash.
Syntax	Integer
Access	Read-only

Table 75. Controller Instance. The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerInstance`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.73
Description	Shows the current instance of the controller for stash.
Syntax	Integer
Access	Read-only

Table 76. Controller Non-RAID Disk Cache Policy . The following table describes the name, object ID, description, syntax, and access level.
Name	`controllerNonRAIDdiskCachePolicy`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.74
Description	Displays the current disk write cache policy for Non-RAID disks.
Syntax	DisplayString
Access	Read-only